There are several ways to traditional mixer impeller
There are many types of impeller, there are dozens of common. Usually, the mixer is divided into low viscosity liquid and viscous liquid with two broad categories. Paddle turbine, folding, bending/turbine, turbine disks, pusher, bloom Ma Jinshi and tooth chip is suitable for low viscosity fluid mixing, operating under the turbulent state, the impeller diameter d and the ratio of the diameter d d/d) usually is 0. 3 to 0. Around 6. Anchor, screw conveyor and screw is suitable for high viscous fluid mixing, operating in the laminar or transitional flow condition. In mixed viscous liquid, in order to reduce the retention of mixture zone, d/d usually 0. Around 9, in which the screw impeller is an exception, it or offset installation, or used with diversion cylinder, the d/d is commonly 0. 4 to 0. 5. Agitation tank within the three dimensional flow of liquid, it can be according to the cylindrical coordinate system is decomposed into axial flow and radial flow and axial flow ( Or tangential flow) 。 Under turbulent flow condition, advancing the impeller in addition to produce circumferential flow, also produced a large number of axial flow, is typical of the axial flow impeller; Tooth plate, paddle, bending turbine and blade straight blade disc turbine without baffles in the stirred tank, make the liquid produces the circular flow with the impeller rotation, also due to the impeller centrifugal force makes the liquid along the blade to the tank wall, namely form strong radial flow, so these called radial flow impeller impeller. In the curved blade turbine compared with straight blade disc turbine, folding blade turbine axial flow composition, reason often used in the occasion of the axial flow requirements are higher. Screw conveyor and screw impeller viscous liquid produce axial flow; Anchor impeller main causes the liquid produce circumferential flow. Horizontal mixer, reverse osmosis water treatment machine, liquid detergent production machine washing powder production factory house, the previous: horizontal mixer material leakage on solutions
The detergent powder production line with an annual output of 80,000 tons was put into operation
The detergent powder production line with an annual output of 80,000 tons, which is designed and supplied by our company and installed by the owner, has been commissioned in Fujian and started normal production.
Installation of detergent powder production line is still underway during the Spring Festival
The foreign project, the full-automatic spray tower detergent powder production line with annual put of 40,000 tons designed and constructed by the company. In order to ensure that the project is delivered on schedule, the installation work during the Spring Festival continues on schedule. Years can fade the memory, but can not fade these silently dedication in the work of the people, thank them for their efforts.
The First Detergent Powder Factory of Nice In Africa Was Officially Put Into Operation
Recently, the 5t/hr detergent powder packaging production line of Nice designed and constructed by our company has been put into operation smoothly. The project is China's first daily chemical manufacturing enterprise established in Angola, Africa. After joint efforts of various parties, it took less than 8 months from the construction to the operation, which was praised locally as "the speed of China".
The production equipment of detergent and disinfectant produced by our company is widely used
Our company is the manufacturer and service provider of detergent powder, liquid detergent (laundry detergent, hand sanitizer, dishwashing liquid, bleach, toilet cleaning liquid, etc.) and disinfectant production equipment, which can provide professional technology and equipment research and development, design, manufacture, installation, debugging and service. In recent years, the production equipment of detergent and disinfectant produced by our company has been widely used by domestic and foreign customers.
Sixty containers were loaded successfully
From August 11 to 17, our factory concentrated all resources and worked continuously. Under the close cooperation of technical, engineering and foreign trade departments, we loaded 60 containers of detergent powder equipment within 7 days and passed customs clearance successfully. These equipment are sent to Zambia, Angola and other countries for detergent powder project.